Sun Microsystems SPARCstation 5 - Figure 9-13; Figure 9-14

Storage Devices 9-17
9
5. Loosen the two captive Phillips screws that secure the system board to the
rear of the chassis.
See Figure 9-13.
Figure 9-13 Rear Panel Captive Screws
6. Pull the board out of the back of the chassis until it clears the plastic
card guide.
See Figure 9-14. Place the board on an antistatic surface.
Figure 9-14 Removing the System Board
Captive screw
Captive screw
Card guide
System board