25
⑧ In order to end the sewing speed setting, choose [RETURN] by
using the DOWN key and press ENTER.
⑨ Then the screen moves to the initial display for parameter
information change. Press the UP, DOWN keys to choose either
[HOME] or [RETURN] and then press ENTER.
⑩ The screen shifts to the initial display.
◀Note▶
When READY is pressed at Step
⑧
, changed parameter
values are saved in the memory, and the initial screen
appears.
↓
OR
↓
↓
If set at higher than the main sewing speed, the sewing speed for up bartack part will be equal to the
main speed. However, as long as the upper / lower bartack part speed is lower than the main speed,
it can be set as you wish.
Caution
To Next Page
Loading...
