Suzuki LT-Z400 2003 - Generator Rotor Cover; Neutral Switch

3·56 ENGINE
NEUTRAL SWITCH
• Install the springs CD. contacts (2) and new O~r i ng Q).
• Install the neutral switch and tighten the bolts to the specified
torque.
[!] Neutral switch bolt: 6.5 N·m (0.65 kgf-m, 4.7 Ib·f!)
GENERATOR ROTOR COVER
• Install the starter driven gear CD . dowel pins (2) , and new gas·
ket @.
I CAUTION I
Use a new gasket to prevent 011 leakage.
• Tighten the generator rotor cover bolts securely.