Suzuki LT-Z400 2003 - REAR BRAKE

REAR BRAKE
CONSTRUCTION
.,
~
ITEM N·m kgf-m
®
23 2.3
<Bl
18 1.8
©
10 1 .0
<!l
18 1.8
e
28 2.8
iEl
18 1.8
<!l
18 1.8
8
23 2.3
(j)
7.5 0.75
(JJ
23 2.3
A WARNING
Ib-ft
16.5
13.0
70
13.0
20.5
13.0
13.0
16.5
5.5
16.5
CHASSIS 6-49
(,j)
~
GJl Brake caliper holder
<D Reservoir lank ~ Parking brake
(%l Reservoir lank hose ~ Parking brake lever
@ Brakehose
@ Adjuster
@ Snapring
@ O-ring
® Connector
@ Gasket
@ O-ring
® Bool
(f; Spring
@ Piston/cup sel
® Brake hose union bolt
® Push rod @ Brake master cylinder rod locknut
®I Snap ring
© Brake mas ter cylinder mounling bolt
® Boot (Q P ad mounting pin
~ Caliper It! Parking brake bolt
@
Pad
® Parking brake adjuster locknut
@ Spring @ Brake caliper ho l der pin
<lV Piston Iijl Br ake caliper slide pin
® Dust seal CD Air bleeder valve
® Piston seal Q) Disc bolt
" This brake system Is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use or mix
different types o111uid such as silicone-based or petroleum-based.
* Do not use any brake fluid taken from old , used or unsealed containers. Never reuse brake
fluid left over from the last servicing or stored for long periods.
* When storing the brake fluid , seal the container completely and keep away from children .
* When replenishing brake fluid , take care not to get dust Into fluid.
* When cleaning brake components, use fresh brake fluid. Never use cleaning solvent .
• A contaminated brake disc or brake pad reduces braking performance. Discard contaminated
pads and clean the disc with high quality brake cleaner or neutral detergent .
ICAUTION ]
Handle brake fluid with care : the fluid reacts chemically with paint , plastics , rubber materials
etc . and will damage them severly.