• Remove the oil tank.
REMOUNTING
Remount the oil tank and hoses in the
re
verse
order
of removal.
Pay attention to the
following pOints.
• When connecting the oil tank right hose, place the base of oil
pipe against the stopper on engine.
• Tighten the oil hose union
bolt
G)
to
the specified torque.
~
011
hose
union
bolt:
23 N·m (2.3
kgf
-m, 16.5
Ib·lt)
• Install the new a-rings to the right and left hoses.
I CAUTION I
Use
the
new O-rings
to
prevent
engine
coolant
leak-
age.
• Apply engine oil to the O-rings.
•
Pour
engine oil. (c::::72-12)
• InslaUthe
radiator. (c:::::rS-6)
• Pour engine coolant. (
c:r
2-14)
•
In
stall the front fender.
COOLING
AND
LUBRICATION
SYSTEM
5·23
l!l'
L
e
To Next Page
Loading...
