• Remove the steer
in
g shaft @.
• Remove the
dust
seals
®I
from the steering shaft.
• Remove the steering shaft holder half
®.
• Remove the
dust
seat @ from the steering shaft.
INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
•
Handlebar distortion
• Handlebar clamp wear
DUST
SEALS
AND
O-RING
Inspect the dust seals and O-ring for wear or damage. If any
damages are found, replace the
dust
seals with
new
ones.
TIE ROD
Inspect
the tie rod for distortion
or
damage. If any damages are
found. replace the tie rod with a
new
one.
CD
Tie rod end
(Z)
Locknut
~
Locknut
@ Tie
rod
I
CAUTION
I
The
locknuts
(2)
with
a
yellow
finished
surface
have
left
-hand threads.
CHASSIS
6-41
To Next Page
Loading...
