• Disassembly the starter motor,
as
shown.
ITEM
N·m
kgf-m
,
...
®
5
0.5
3.5
STARTER MOTOR INSPECTION
CARBON
BRUSHES
Inspect the carbon brushes for abnormal wear, cracks, or
smoothness in
the
brush holder.
If any damages are found, replace the brush assembly with a
new
one.
COMMUTATOR
Inspect the commutator for discoloration, abnormal wear or
undercut
flY.
If abnormal
wear
is found, replace
the
armature with a new one.
If the commutator surface
is
discolored, polish it with
#400
sand-
paper and wipe
it
using a clean, dry cloth.
If there is
no
undercut, scrape out the insulator
CD
with a saw
blade.
ARMATURE
COIL
INSPECTION
Check
for continuity between each segment and between each
segment and the armature shaft using the
multi circuit tester.
If
there
is
no
continuity between the segments or there is conti-
nuity between the segments and shaft, replace the armature
with a new one.
lim
0990()"25008:
Multi
circuit
tester
set
~
Tester
knob
Indi
cation
:
Continuity
test (-n)
ELECTR
IC
AL
SYSTEM
1·13
~
t::::
ITJ!
CD
To Next Page
Loading...
