• Install the steering shaft bushing
CD
with the special
1001
.
1St!
09924-84510:
Bearing
Installer
set
REASSEMBLY AND REMOUNTING
Reassemble and remount the steering slaft in the reverse order
of removal and disassembly. Pay attention to the following
points:
STEERING SHAFT
• Apply SUZUKI SUPER GREASE
~
A"
to the
a-ring
, dust seals
and steering shaft before remounting the steering shaft.
~
99000-25030: SUZUKI SUPER GREASE " A" (USA)
99000-25010: SUZUKI SUPER GREASE " A"
(Others)
• Install the dust seal
CD
to
the steering shaft.
• Install the new O-ring
~
and dust seal to the steering shaft.
• Tighten the steering shaft nut to the specified torque.
(!l
Steering
shalt
nut
: 49 N·m (4.9
kgf-m,
35.5 Ib-
It)
• Install the cotter pin.
I
CAUTION
I
Replace the removed
cotter
pin
with
a new
one
.
CHASS
IS
6-43
To Next Page
Loading...
