Suzuki LT-Z400 2003 - Gearshift Cam, Fork and Reverse Lock Shaft

3-48 ENGINE
GEARSHIFT CAM, FORK AND REVERSE LOCK SHAFT
• In stall the gearshift forks into the gearshifting grooves in the
correct position and direction.
G) Gearshift fork No.1
(i) Gearshift fork No.2
@ Gearshift fork No.3
• In staillhe gearshift cam @.
• Install the gearshift fork shaft (5) and reverse lock shaft @.
NOTE:
•
After the gearshift fork shaft and gearshift forks have been fit·
ted, make sure that the gears engage normally.
• Set the transmission gears to the neutral position.
<D Gearshift fori< No.1
C%l Gearshift fork No.2
(3) Gearshift fork shaft
(J) Pln
(5) Gearshift cam
@ Gearshift ior1<" No .3
(!l Reverse lock shaft
(8) Spring