REAR
WHEEL
HUB
• Remove the rear wheel. (
c::7
6-10)
• Remove the cotter pin and loosen the wheel hub nut by apply-
ing the rear brake.
• Remove the wheel hub nut and washer.
• Remove the wheel hub
CD.
INSPECTION AND DISASSEMBLY
DUST
SEAL
Inspect the dust seal lips for wear
or
damage.
If any damages are found, replace the
dust
seal with a new one.
• Remove the
dust
seals with the special tool.
dib
09913-50121: Oil seal re
mover
I
CAUTION
I
Replace the removed
dust
seal w
ith
a new
one
.
HUB
BEARINGS
Inspect the inner race play of the hub bearing
by
hand while
it
is
in
the wheel hub.
Rotate the inner race
by
hand
10
inspect for abnormal noise and
smooth rotation.
If there
is
anything unusual, replace the bearing
with a new one.
• Remove the hub bearing with the special tool.
Et
09921-20240:
Bearing
remove
r set
I
CAUTION
I
I Do
not
reuse
the
re
moved
bearings
.
-
CHA
SSIS
6-
11
Play
lli
I
r Play
-
. -
- -
f--.
-
~
11
L
To Next Page
Loading...
