• Remove the needle bearing with the special toots.
S 09923-73210:
Bearing
pu
ll
er
09930-30104:
Sliding
hammer
I
CAUTION
I
Do
not
reuse the
removed
bearing.
BRAKE
DISC COVER
Inspect the brake disc cover for damage. If any damages are
found, replace the brake disc cover with a new one.
REASSEMBLY AND REMOUNTING
Reassemble and remount the front suspension in t
he
reverse
order of removal and disassembly. Pay attention to
th
e foHowing
points:
• Install the knuckle end to the wishbone
arm
by
using the spe-
cial tools.
dEl
09913-70210:
Bearing
installer
• Install the snap ring.
CHASSIS
6-33
To Next Page
Loading...
