HO
ENGINE
CAMSHAFT/AUTOMATIC DECOMPRESSION
ASSEMBLY
• Turn the generator rotor until the
'T'
line
on
the generator
rotor
is
aligned with the center of the hole
in
the generator
cover.
(CAUTION I
If the crankshaft Is turned
without
drawing the cam
chain upward, the cam chain will catch between crank·
case and cam chain
drive
sprocket.
NOTE:
Just before installing the camshaft into the cylinder
head
,
apply
molybdenum
0;1
solution
to
the
camshaft journals and cam
faces. Also, apply engine oil to the camshaft journal holders .
•
Place
each
camshaft
into
the
correct
position
.
To Next Page
Loading...
