TIRES
TIRE REPLACEMENT
• Remove the front and rear wheels. (c::76-1 0)
•
After removing the
air
valve cap,
re
lease the tire pressure by
depressing the valve.
• Dismount the bead from the rim completely as shown.
• Separate the tire from the rim by using a set
of
tire levers and
rim protectors.
I
CAUTION
I
When
using
the
tire
lever
,
do
not
scratch
or
hit
the
sealing
port
i
on
(hump
)
of
the wheel
or
It
may
cause
air-leakage.
• Inspect the sealing portion of the rim for contamination and
distortion.
If any damages are found, replace
the
rim with a
new
one.
• Clear
up
the sealing portion
of
the rim.
• Ap
pl
y lire lubricant
to
the tire bead and the flange of the rim.
I
CAUTION
I
Never
apply
grease, all
or
gasoline
to
the
tire bead
because t
hey
will
deter
iorate
the
tire
.
I
CAUTION
I
The standard
tire
fitted
on
this
vehicle is
AT22x7R10
**
for
the
fr
ont
and AT20x10R9
**
for
the
rear.
The use
of
tires
other
than
the
standard
may
cause
instabi
lity
.
It
is
highly
recommended
to
us
e
the
speci-
fied tire.
• Mount the tire on the rim.
CHASSI
S 1
;.1
5
To Next Page
Loading...
