OIL
FILTER
REPLACEMENT
• Drain the engine oil
as
described
in
the engine oit repiace-
ment procedure.
• Remove the oit fitter cap
CD
and oil
filter
~.
• Replace the oil fitter with a
new
one.
• Install the new O-ring
@.
e Install the spring @ and
new
O-ring @.
I
CAUTION
I
I
Apply
engine
all
to
the O-rings.
• Replace the oil filter cap and lighten the nut securely.
NOTE:
Face the triangle mark ®
on
the cap upward.
• Add new engine oil
and
check the oil level
85
described in the
engine
oil replacement procedure.
~
Engine
all
capacity
011
change
: 2.0 L (2.1 US
qt
, 1.8
Imp
qt)
011
and
filter
change
: 2.1 L (2.2 US
q1
, l .
8Imp
qt)
Engine
overhaul:
2.2 L (2.3 US
qt
, 1.9
Imp
qt)
I
CAUTION
I
When reassembling
the
all
filter
, make
sure
that
the
all
filter Is Installed as
shown
above. If the
filter
Is
installed
Improperly
.
serious
engine
damage
may
result.
ENGINE OIL HOSES
Inspect
Inltia"y
at 1
month
and every 3
months
there-
after.
Inspect the engine oil hoses for damage and oil leakage. If any
damages are found, replace the engine
oil hoses with new ones.
PERIODIC
MAINTENANCE
2·13
To Next Page
Loading...
