Suzuki LT-Z400 2003 - Removal

HO CHASSIS
REMOVAL
• Place the vehicle on the level ground and support the vehicle
with a jack or wooden block.
SPROCKET
• Remove the left rear wheel. (c::::rS-1 0)
• Remove the left rear wheel hub. (c:::re- 11)
• Remo ve the rear caliper.
• Loosen the chain adjust nuts CD and the rear axle housing
bolts ~ .
• Loosen the sprocket mounting botts, and remove the sprocket
@.
REAR AXLE SHAFT
• Remove the rear wheels. ( 0- 6-10)
• Remove the rear wheel hubs. ( c:r S-l1)
• Loosen the axle nuts CD with the special tool by applying the
rear brake.
• Remove the axle nuts and concave washers (2).
• Remove the sprOCket flange @.
mil 09940-92450: Rear axle nut holder
• Remove the caliper.
• Draw out the rear axle shaft to the right.
• Remo ve the brake disc .
I CAUTION I
Do not attempt to remove the brake disc flange from
the rear axle shaft .
The rear axle shaft
Is available only as an assembly .