• Remove the water pump cover.
• Remove the snap ring
CD
. water pump driven gear
(%)
, pin @
and washer @.
• Remove the E-ring @. impeller @, and water pump body (f).
• Remove the bearing using the special tool.
mil
09921-20240:
Bearing
remover
set
NOTE:
If
there is
no
abnormal noise, bearing removal is
nol
necessary.
I CAUTION I
The removed bearing
must
be
replaced
with
a new
one
.
• Remove the mechanical seal using the special tool.
am
09921-20240: Bearing
remover
set
NOTE:
If
there is no abnormal condition, the mechanical seal removal is
not necessary.
ICAUTION I
The removed mechanical seal
must
be replaced
with
a
new
one
.
C
OOLING
AND
LUBRICATION
SYSTEM
5-
15
To Next Page
Loading...
