Suzuki LT-Z400 2003 - Page 168

6-20 CHASSIS
• Remove the spring <D .
• Place a rag over the brake caliper piston to prevent the piston
from popping out and then force out the piston using com-
pressed air.
I CAUTION I
Do not use high pressure air to prevent brake caliper
piston damage.
• Remove the dust seal and piston seal.
I CAUTION I
Do not reuse the dust s8al and piston seal to prevent
fluid leakage.
• Remove the cap (%J and loosen the brake caliper holder slide
pin @.
• Remove the brake caliper holder @.
• Remove the brake caliper holder slide pin @.