• Remove the spacer
CD.
Inspect the bushing and dust seal for wear or damage. If any
damages are found, replace the shock absorber with a
newone
.
• Apply SUZUKI SUPER GREASE "A" to the bushing and dust
seals before remounting .
.0
99000-25030: SUZUKt SUPER GREASE " A"
(USA)
99000-25010: SUZUKt SUPER GREASE
"A"
(Others)
KNUCKLE
Inspect the knuckle for damage. If any damages are found.
replace the knuckle with a new one.
KNUCKLE
END
Inspect the knuckle end boot for wear
or
damage. If
any
dam·
ages are found, replace the knuckle end with a new one.
Inspect the knucle end for smooth movement.
If there are any
abnormalities, replace the knuckle end with a
new
one.
• Remove the snap ring.
• Remove the knuckle end by using the special tools.
Gib
09913-70210:
Bearing
Installer
set
CHASSIS
6-31
To Next Page
Loading...
