Suzuki LT-Z400 2003 - Page 201

• Loosen the caliper holder slide pin (l). and then remove the
caliper holder @.
• Remove the caliper holder slide pin ®.
• Place a rag over the brake caliper piston to prevent the piston
from popping out.
• Force out the piston by pushing the piston pin @.
• Remove the dust seal ®l , piston seal ® and O-ring GZl .
!CAUTION !
• Do not reuse the dust seal, piston seal and O- ring to
prepent leakage of brake fluid .
• Do not attempt to remove the retainer @.
CHASSIS 6- 53