• When replacing the boot with a new one, apply SUZUKI
SIU·
CONE GREASE to the groove of parking brake axle.
~
99000-25100: SUZUKI SILICONE
GREASE
• Loosen the locknut @ and turn the adjuster @
in
completely,
so thai the cable
play
is
maximum.
• Set the parking brake shaft @
in
neutral position by rotating
the shaft.
• Install the parking lever
®l
onto the parking brake s
haN
@
with the punch mark ® aligned with corner of hexagon on the
shaft @ . so that parking lever
®>
is
at angle of approx. 90
degrees to the line @
as
shown in illustration.
• Hook the return spring @ on the parking
le
v
er
with the spring
end faced the
caliper as shown
in
illustration.
• Connect the parking cable @.
• Install the adjuster @ and the locknut
®.
• Adjust the parking brake. (
c:7
2-17)
CHASSIS
6-57
To Next Page
Loading...
