Suzuki LT-Z400 2003 - Page 230

6-82 CHASSIS
DUST SEAL
Inspect the dust seals for wear or damage. If any defect are
founds, replace the dust seal with a new one.
AXLE BEARINGS
Inspect the play of the wheel bearings by finger while they are in
the axle ho using. Rotate the inner race by finger to inspect fo r
abnormal noise and smooth rotation.
Replace the bea
ri ng with a new one, if there is anything unusual.
• Remove the dust seals with the special 1001.
dEl 09913-50121 : Oil seal remover
I CAUTION I
I Do not reuse the removed dust seals •
• Remove the bearings with appropriate bar CD and remove the
bearing spacer.
I CAUTION I
Do not reuse the re mov ed beari ngs .
- ,, ~ ~ . .
~))