CABLE
PLAY
ADJUSTMENT
After installing the reverse lock release cable, adjust the cable
play. The cable adjuster is located at inside of the fuel tank right
side cover.
• Loosen the locknut
(1).
• Turn the adjuster
(2)
in
or
out until the cable play ® should
be
1 - 2 mm (0.04 - 0.
08
in)
at
the reverse lock release knob.
• Tighten the locknut
<D
securely.
• After adjustment, be sure to check for reverse lock function.
CHA
S
SIS
6-93
To Next Page
Loading...
