Suzuki LT-Z400 2003 - Page 305

Drive Chain
ADJUSTING
To adjust the drive chain, use the following procedure.
1. Loosen the four cap screws on the top
of the swing
arm; then turn the adjuster nut until the chain has
30-40 mm (1.2-1.6 in.) slack midway between the
chain buffer and the rear sprocket.
.. . ..
.............
". " • -: - - €:!IF.~
~
.- ............. -
.. .
. . . .-
30 · 40 mm
(1 . 2·1.6 in.)
2. Tighten th e four cap screws to specifications (see
Sec ti on 10) a nd recheck th e chain tension.