3-10
ENGINE
• Remove the valve timing inspection plug
CD
and generator
cover cap
<2>.
• Tum the generator rotor until the "T" line on the generator
rotor is aligned with the center of the hole in the generator
cover.
NOTE:
Before
removing the camshaft journal holders, the piston must
be
at
TDC
of
the compression stroke.
• Remove the cam chain guide @ and camshaft journal holders
@.
• Remove the dowel pins @. intake camshaf @ and exhaust
camshaft
(J).
NOTE:
Do not drop
the
dowel pins and camshaft drive chain into the
crankcase.
• Remove the four cylinder head bolts in diagonal stages.
To Next Page
Loading...
