3-60 ENGINE
CAMSHAFT/AUTOMATIC DECOMPRESSION
ASSEMBLY
• Turn the generator rotor until the “T” line on the generator
rotor is aligned with the center of the hole in the generator
cover.
"
NOTE:
Just before installing the camshaft into the cylinder head, apply
molybdenum oil solution to the camshaft journals and cam
faces. Also, apply engine oil to the camshaft journal holders.
• Place each camshaft into the correct position.
If the crankshaft is turned without drawing the cam
chain upward, the cam chain will catch between crank-
case and cam chain drive sprocket.
To Next Page
Loading...
