ENGINE 3-3
ENGINE REMOVAL AND REMOUNTING
ENGINE REMOVAL
Before taking the engine out of the frame, wash the engine
using a steam cleaner. Engine removal is sequentially explained
in the following steps.
• Drain engine coolant. (!2-14)
• Remove the engine under cover
1.
• Drain engine oil. (!2-12)
• Remove the gearshift lever
2 and spacers.
• Remove the engine oil outlet pipe
3 and inlet pipe
4.
"
• Remove the seat. (!6-4)
• Disconnect the battery
- lead wire.
Do not lose the spacer with O-ring behind the outlet oil
pipe.
To Next Page
Loading...
