Suzuki LT-Z400 - Remounting

CHASSIS 6-77
REMOUNTING
Remount the cushion lever, cushion rod and swingarm in
reverse order of removal. Pay attention to the following points:
• Install the swingarm and pivot shaft.
• Tighten the swingarm pivot nut to the specified torque.
# Swingarm pivot nut: 84 N·m (8.4 kgf-m, 61.0 lb-ft)
• Install the rear shock absorber and cushion lever.
• Tigten the rear shock absorber mounting nuts to the specified
torque.
# Rear shock absorber nut (Upper)
1:
60 N·m (6.0 kgf-m, 43.5 lb-ft)
Rear shock absorber nut (Lower)
2:
55 N·m (5.5 kgf-m, 40.0 lb-ft)
• Tigten the cushion rod nut and cushion lever nut to the speci-
fied torque.
# Cushion lever nut
3:78 N·m (7.8 kgf-m, 56.5 lb-ft)
Cushion rod nut
4:78 N·m (7.8 kgf-m, 56.5 lb-ft)