COOLING AND LUBRICATION SYSTEM 5-17
BEARING CASE/MECHANICAL CASE
• Visually inspect the bearing case and mechanical case for
damage.
• Replace the water pump body if necessary.
IMPELLER
• Visually inspect the impeller and its shaft for damage.
REASSEMBLY AND INSTALLATION
• Install the oil seal using the special tool.
& 09913-70210: Bearing installer set
NOTE:
The stamped mark on the oil seal faces outside.
• Apply a small quantity of the SUZUKI SUPER GREASE “A” to
the oil seal lip.
* 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
To Next Page
Loading...
