5-14 COOLING AND LUBRICATION SYSTEM
REMOVAL AND DISASSEMBLY
• Drain engine coolant. (%2-14)
• Drain engine oil. (%2-12)
"
• Disconnect the radiator hose.
• Disconnect the rear brake switch spring and brake pedal
spring as to lower side.
• Remove the master cylinder mounting bolts.
• Remove the clutch cover with pushing down the rear brake
pedal.
* Do not open the radiator cap when the engine is hot,
as you may be injured by escaping hot liquid or
vapor.
* The engine must be cool before servicing the cooling
system.
* Engine coolant may be harmful if swallowed or if it
comes in contact with the skin or eyes. If engine
coolant gets into the eyes or contacts the skin, flush
the eyes or wash the skin thoroughly, with plenty of
water. If engine coolant is swallowed, induce vomit-
ing and call a physician immediately.
To Next Page
Loading...
