5-6 COOLING AND LUBRICATION SYSTEM
• Disconnect the engine coolant temperature switch lead wire
coupler
1 and cooling fan motor lead wire coupler
2.
• Disconnect the upper and lower radiator hoses.
• Remove the three mounting bolts and radiator assembly.
RADIATOR REMOUNTING
• Install the radiator and the radiator hoses in the reverse order of removal.
• Connect the cooling fan motor lead wire coupler and engine coolant temperature switch lead wire coupler.
• Install the radiator cover.
• Install the drain plug.
• Pour engine coolant. (%2-14)
• Bleed air from the cooling curcuit. (%2-14)
• Install the front fender.
RADIATOR RESERVOIR TANK
REMOVAL/REMOUNTING
• Remove the reservoir tank mounting bolts and disconnect the
siphon hose from the reservoir tank and drain engine coolant.
• Install the reservoir tank in the reverse order of removal.
• Fill the reservoir tank to the upper level line.
To Next Page
Loading...
