PERIODIC MAINTENANCE 2-25
CHASSIS BOLTS AND NUTS
Check that all chassis nuts and bolts are tightened to their specified torque. (Refer to page 2-26 and 2-27 for
the locations of the following nuts and bolts.)
Tighten initially at 1 month and every 3 months there-
after.
Item N·mkgf-mlb-ft
1 Handlebar clamp bolt 23 2.3 16.5
2 Steering shaft holder bolt 23 2.3 16.5
3 Steering shaft lower nut 49 4.9 35.5
4 Wishbone arm pivot nut (Upper and Lower) 65 6.5 47.0
5 Front hub nut 65 6.5 47.0
6 Rear hub nut 100 10.0 72.5
7 Wheel set nut (Front and Rear) 50 5.0 36.0
8 Front shock absorber mounting bolt (Upper) 60 6.0 43.5
9 Front shock absorber mounting nut (Lower) 60 6.0 43.5
0 Tie rod end nut 60 6.0 43.5
A Tie rod locknut 29 2.9 21.0
B Brake air bleeder valve 7.5 0.75 5.5
C Brake caliper mounting bolt (Front and Rear) 26 2.6 19.0
D Brake pipe nut 16 1.6 11.5
E Footrest bolt (M10) 55 5.5 40.0
F Brake master cylinder mounting bolt (Front and Rear) 10 1.0 7.0
G Brake hose union bolt (Front and Rear) 23 2.3 16.5
H Brake pedal boss nut 11 1.1 8.0
I Rear brake master cylinder rod locknut 18 1.8 13.0
J Rear sprocket mounting bolt 54 5.4 39.0
K Rear axle locknut (Outside) 180 18.0 13.0
L Rear axle locknut (Inside) 20 2.0 14.5
M Disc plate mounting bolt (Front and Rear) 23 2.3 16.5
N Rear axle housing set bolt (Right) 73 7.3 53.0
O Rear axle housing set bolt (Left) 100 10.0 72.5
P Rear shock absorber nut (Upper) 60 6.0 43.5
Q Rear shock absorber nut (Lower) 55 5.5 40.0
R Cushion lever nut 78 7.8 56.5
S Swingarm pivot nut 84 8.4 61.0
T Seat rail bolt (Upper) 26 2.6 19.0
U Seat rail bolt (Lower) 55 5.5 40.0
V Knuckle end nut 43 4.3 31.0
To Next Page
Loading...
