Suzuki LT-Z400 - Brake Caliper Removal and Disassembly

6-52 CHASSIS
BRAKE CALIPER REMOVAL AND
DISASSEMBLY
• Disconnect the parking brake cable by removing the locknut
1 and lever 2.
• Disconnet the brake hose
3 and allow the brake fluid to drain
into a suitable receptacle.
• Remove the parking brake housing
4.
)
• Remove the brake caliper by removing the caliper mounting
bolts
5.
NOTE:
Before removing the caliper, slightly loosen the caliper holder
slide pin
A to facilitate later disassembly.
• Remove the pad. (!6-50)
• Remove the pad spring
6.
Brake fluid, if it leaks, will interfere with safe running
and discolor painted surfaces. Check the brake hose
and hose joints for cracks and fluid leakage.