Suzuki LT-Z400 - Remounting

COOLING AND LUBRICATION SYSTEM 5-23
• Remove the oil tank.
REMOUNTING
Remount the oil tank and hoses in the reverse order of removal.
Pay attention to the following points.
• When connecting the oil tank right hose, place the base of oil
pipe against the stopper on engine.
• Tighten the oil hose union bolt
1 to the specified torque.
) Oil hose union bolt : 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the new O-rings to the right and left hoses.
!
• Apply engine oil to the O-rings.
• Pour engine oil. (%2-12)
• Install the radiator. (%5-6)
• Pour engine coolant. (%2-14)
• Install the front fender.
Use the new O-rings to prevent engine coolant leak-
age.