CHASSIS 6-59
MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Drain the brake fluid. (!6-51)
• Place a rag underneath the brake hose union bolt on the mas-
tercylinder to catch any split brake fluid. Remove the brake
hose union bolt
1 and disconnect the brake hose
2.
%
• Loosen the locknut
3.
• Remove the master cylinder mounting bolt
4.
• Remove the master cylinder by turning the master cylinder
rod
5.
• Disconnect the reservoir tank hose
6.
Immediately wipe off any brake fluid contacting any
part of the vehicle. The brake fluid reacts chemically
with paint, plastics, rubber materials, etc., and will
damage them severely.
To Next Page
Loading...
