Suzuki LT-Z400 - Cam Chain Tension Adjuster

ENGINE 3-63
CAM CHAIN TENSION ADJUSTER
• Apply engine oil to the push rod.
• Unlock the ratchet mechanism
1 and push the push rod 2 all
the way.
• Install the new gasket and cam chain tension adjuster to the
cylinder.
• Tighten the cam chain tension adjuster mounting bolts to the
specified torque.
# Cam chain tension adjuster mounting bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the spring
3.
• Tighten the spring holder bolt to the specified torque.
# Cam chain tension spring holder bolt:
30 N·m (3.0 kgf-m, 21.5 lb-ft)