Suzuki LT-Z400 - Neutral Switch; Generator Rotor Cover

3-56 ENGINE
NEUTRAL SWITCH
• Install the springs
1, contacts 2 and new O-ring 3.
• Install the neutral switch and tighten the bolts to the specified
torque.
# Neutral switch bolt: 6.5 N·m (0.65 kgf-m, 4.7 lb-ft)
GENERATOR ROTOR COVER
• Install the starter driven gear
1, dowel pins 2, and new gas-
ket
3.
"
• Tighten the generator rotor cover bolts securely.
Use a new gasket to prevent oil leakage.