ENGINE 3-7
ENGINE REMOUNTING
Remount the engine in the reverse order of engine removal.
Pay attention to the following points:
NOTE:
* The engine mounting nuts are self-locking.
* Once the nut has been removed, it is no longer of any use. Be sure to use new nuts, and then tighten them
to the specified torque.
• Install the exhaust pipe and muffler.
• Install the thermostat and thermostat cover. (!5-12)
• Tighten the exhaust pipe nuts
1, muffler mounting bolts
2
and connecting bolt
3 to the specified torque.
# Exhaust pipe nut: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler mounting bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler connecting bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
ITEM N·m kgf
-
m lb-ft
A
66 6.6 47.5
B
66 6.6 47.5
C
26 2.6 19.0
D
Coller
@
To Next Page
Loading...
