CHASSIS 6-33
• Remove the needle bearing with the special tools.
& 09923-73210: Bearing puller
09930-30104: Sliding hammer
%
BRAKE DISC COVER
Inspect the brake disc cover for damage. If any damages are
found, replace the brake disc cover with a new one.
REASSEMBLY AND REMOUNTING
Reassemble and remount the front suspension in the reverse
order of removal and disassembly. Pay attention to the following
points:
• Install the knuckle end to the wishbone arm by using the spe-
cial tools.
& 09913-70210: Bearing installer
• Install the snap ring.
Do not reuse the removed bearing.
To Next Page
Loading...
