6-82 CHASSIS
DUST SEAL
Inspect the dust seals for wear or damage. If any defect are
founds, replace the dust seal with a new one.
AXLE BEARINGS
Inspect the play of the wheel bearings by finger while they are in
the axle housing. Rotate the inner race by finger to inspect for
abnormal noise and smooth rotation.
Replace the bearing with a new one, if there is anything unusual.
• Remove the dust seals with the special tool.
& 09913-50121: Oil seal remover
%
• Remove the bearings with appropriate bar
1 and remove the
bearing spacer.
%
Do not reuse the removed dust seals.
Do not reuse the removed bearings.
To Next Page
Loading...
