PERIODIC MAINTENANCE 2-9
EXHAUST SIDE
How to use this chart:
I. Measure tappet clearance when the engine is cold.
II. Measure present shim size.
III. Match clearance in vertical column with present shim size in horizontal column.
Example:
Tappet clearance is 0.38 mm
Present shim size 2.90 mm
Shim size to be used 3.05 mm
TAPPET SHIM SELECTION TABLE (EXHAUST)
TAPPET SHIM NO. (12892-41C00-XXX)
TAPPET SHIM SET NO.(12800-41810)
To Next Page
Loading...
