6-84 CHASSIS
• Install the bearings to the axle housing with the special tool.
& 09941-34513: Bearing installer set
09913-70210: Bearing installer set
%
• Install the dust seals
3 with the special tool.
& 09913-70210: Bearing installer set
NOTE:
Make sure that the stamped mark on the dust seal faces to the
bearing.
* First install the right bearing
1 to the bottom, and
then install the spacer and left bearing
2.
* The sealed cover of the bearing must face outside.
Left Right
Spacer
Clearance
To Next Page
Loading...
