PERIODIC MAINTENANCE 2-17
• Adjust the brake switch so the brake light comes on when the
brake pedal is depressed 7 – 10 mm (0.3 – 0.4 in).
PARKING BRAKE
Parking brake adjustment may be required if the parking brake
does not work properly. Every time the brake pads are replaced,
adjust the parking brake.
• Loosen the parking brake adjuster locknut
1 while holding
the adjuster
2 with a screw driver.
• Loosen the adjuster
2.
• Loosen the parking brake cable adjuster locknut
3.
• Turn the cable adjuster
4 so that the cable length
A is 47 –
51 mm (1.9 – 2.0 in).
• Tighten the adjuster locknut
3.
— Continued on the next page —
To Next Page
Loading...
