Measured result that is compared with the threshold
level for triggering (Level) – LEQ measured in the
first profile: Leq(1).
Threshold level of the Source for the trigger
condition fulfilment.
Time interval of checking the triggering conditions.
This parameter can be set as: Logger Step, 0.5 ms,
100.0 ms and 1 s.
Threshold level of the source signal value speed of
changing (Gradient) for trigger condition fulfilment.
Period of signal recording before the first trigger
condition moment: Off or 1 s.
Time of the signal recording after meeting every
trigger condition. The available values can be
selected from 1 s to 8 h. Recording stops after
Recording Time or earlier if the measurement is
stopped manually.
Screen that enables setting the 1/1 Octave or
1/3 Octave spectrum parameters setup: Filter and
Detector.
Position in the Logger Results screen that switches
on/off the Lpeak spectra saving as a time-history in
a logger file.
To Next Page
Loading...
