Svantek SV 971A User Manual

SV 971A User Manual
138
Battery
Position in the Instrument list that enables checking
of the instrument power source status.
Chapter
7.2
Keyboard
Position in the Instrument list that enables setting of
the Shift, Alt, Start/Stop keys functionality and
programming of locking/unlocking the keyboard.
Chapter
7.3
Power Off
Position in the Instrument list that enables selecting
of the period after which the instrument will
automatically switches off in case there was no any
key pressed during this period.
Chapter
7.4
USB
Position in the Instrument list that enables selecting
the transmission speed of the USB interface. There
are two options: Full 12Mbps and High 480Mbps.
Chapter
7.5
Communicatio
n Ports
Position in the Instrument list that enables selecting
and programming the serial port of the instrument
(Serial Port).
Chapter
7.6
Serial Port
Position in the Communication Ports list which
enables selecting the serial port of the instrument –
RS232 or Bluetooth.
In case of the RS232 serial port, you can set the
transmission speed (Baud Rate) and the time limit
during for the data transfer (Time Out). In case of
Bluetooth, you can set the PIN.
Chapter
7.6
Self Vibration
Position in the Instrument list that enables defining
the threshold level for the self-vibration of the
instrument for marker registration. The special
marker will be written to the file when the self-
vibration of the instrument is higher than defined in
the Marker Thr. position.
Chapter
7.7
RTC
Instrument's Real Time Clock. This clock is
displayed in the upper right corner places of the
display.
Chapter
7.8

Svantek SV 971A Specifications

General

Brand	Svantek
Model	SV 971A
Category	Measuring Instruments
Language	English