Svantek SV 971A - Page 184

SV 971A User Manual – Appendixes
184
0 - off.
1 - on.
35
FieldCompensation
Field Compensation:
0 – Off
1 – Free Field
2 – Diffuse Field
3 – Outdoor Environmental
4 – Outdoor Airport
36
UL Th. Level[0]
1
st
profile threshold level for ULT calculation 70 ÷ 140 dB (*10)
37
UL Th. Level[1]
2
nd
profile threshold level for ULT calculation 70 ÷ 140 dB (*10)
38
UL Th. Level[2]
3
rd
profile threshold level for ULT calculation 70 ÷ 140 dB (*10)
39
PEAK Th. Level[0]
1
st
profile threshold level for PTC calculation 70 ÷ 140 dB (*10)
40
PEAK Th. Level[1]
2
nd
profile threshold level for PTC calculation 70 ÷ 140 dB (*10)
41
PEAK Th. Level[2]
3
rd
profile threshold level for PTC calculation 70 ÷ 140 dB (*10)
42
SplitMode
logger files splitting mode:
0 - off.
-1 - The file is created for each measurement cycle.
15 - The file is created every 15 min synchronized to RTC.
30 - The file is created every 30 min synchronized to RTC.
60 - The file is created every 1 hour synchronized to RTC.
1440 - The file is created on the specified times.
43
SplitTime[1]
logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
44
SplitTime[2]
logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
45
SplitTime[3]
logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
46
SplitTime[4]
logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
47
SplitTime[5]
logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
48
SplitTime[6]
logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
49
Pause[1]
programmable pause no. 1.
50
PauseBegin[1]
start time of the pause no. 1 in format 0xhhmm
hh – hour
mm – minute
51
PauseEnd[1]
end time of the pause no. 1 in format 0xhhmm:
hh – hour