SV 971A User Manual – Appendixes
method of viewing results Leq and Lav
0 - Both
1 - Mutually exclusive (visibility depends of the EXCHANGE
RATE parameter)
compensating filter for microphones:
0 - switched off,
1 - switched on
spectrum RMS detector type:
0 - LINEAR,
1 - Fast,
2 - Slow
1
st
profile criterion level (only Dosimeter):
60, 65, 70, 75, 80, 84, 85, 87, 90 (*10 dB)
1
st
profile threshold level (only Dosimeter):
0, 60, 65, 70, 75, 80, 85, 90 (*10 dB)
1
st
profile exchange rate (only Dosimeter):
2, 3, 4, 5, 6
2
nd
profile criterion level (only Dosimeter):
60, 65, 70, 75, 80, 84, 85, 87, 90 (*10 dB)
2
nd
profile threshold level (only Dosimeter):
0, 60, 65, 70, 75, 80, 85, 90 (*10 dB)
2
nd
profile exchange rate (only Dosimeter):
2, 3, 4, 5, 6
3
rd
profile criterion level (only Dosimeter):
60, 65, 70, 75, 80, 84, 85, 87, 90 (*10 dB)
3
rd
profile threshold level (only Dosimeter):
0, 60, 65, 70, 75, 80, 85, 90 (*10 dB)
3
rd
profile exchange rate (only Dosimeter):
2, 3, 4, 5, 6
Summary results. Contents defined as a sum of:
0 - none
1 - Main Results
2 - Spectrum
4 - Spectrum MAX
8 - Spectrum MIN
16 - Spectrum PEAK
32 - Statistical levels
64 - Statistical analysis in profiles
128 - Statistical analysis in 1/1 or 1/3 Octave mode
synchronization the start of measurement with RTC
0 - switched off
-1 - synchronization to 1 sec
1 - synchronization to 1 min
15 - synchronization to 15 min
30 - synchronization to 30 min
60 - synchronization to 1 hour.