To this chapter contents
11. A.C. GENERATOR/STARTING CLUTCH
Precautions in Operation
General information
Refer to chapter 18: The troubleshooting and inspection of alternator
Refer to chapter 18: The service procedures and precaution items of starter motor
Specification
Item Standard value (mm) Limit (mm)
ID of starting clutch gear 27.026~27.045 27.050
OD of starting clutch gear 45.192~45.283 45.183
Torque value
Flywheel nut 5.0~6.0kgf-m
Starting clutch hexagon bolt 1.0~1.4kgf-m with adhesive
8 mm bolts 0.8~1.2kgf-m
12 mm bolts 1.0~1.4kgf-m
Tools
Special tools
A.C.G. flywheel puller: SYM-3110000-HMA
Universal holder: SYM-2210100
11-2
To Next Page
Loading...
