16. STEERING / FRONT SUSPENSION
16-12
Suspension Arm
Removal
Remove the front wheel, wheel hub, and brake
caliper, brake disk, tie-rod, knuckle and front
cushion.
Loosen upper suspension arm nuts.
Remove swing arm bolts.
Loosen 1 bolt from under suspension arm cover
and then remove the cover.
Loosen under suspension arm nuts.
Remove the swing arm bolts.
Remove under suspension arm.
Inspection
Inspect the suspension arm, ball joint and bush for
damage or bending.
Installation
Install in the reverse order of removal procedures.
Torque value:
S
uspension arm nut 5.0kgf-m
Lubricate with grease into suspension arm.
Bush
To this chapter contents
Suspension arm nuts and bolts
Ball joint
Bush
Suspension arm nuts
To Next Page
Loading...
