17. REAR BRAKE & REAR WHEEL & REAR CUSHION
17-12
Adding Brake Fluid
Before removing the brake fluid reservoir, turn the
handle to make the brake fluid reservoir become
horizontal, and then remove the brake fluid
reservoir.
Before serving the brake system, cover the
surface of the painted or the rubber parts by the
rags.
Caution
Supplement brake fluid please do not surpass the
upper limit, spilled brake fluid on painted
surfaces, plastic or rubber components may
result in their damages.
Remove the brake fluid cap and diaphragm.
Increases the high quality brake fluid, uses by all
means must with the trade mark brake fluid joins
in the master cylinder.
Clean the dirty brake disk.
Caution
The dirty brake lining or disk will reduce the
brake performance.
Mixed non-compatible brake fluid will reduce
braking performance.
Foreign materials will block the system,
causing braking performance to be reduced
or totally lost.
Fluid cup
Brake fluid cap
Screw
Diaphragm
Upper level
To this chapter contents
Master cylinder
Fluid cup
To Next Page
Loading...
