8. V-BELT DRIVING SYSTEM
8-7
Check if drive face boss is worn or damaged and
replace it if necessary.
Measure the outer diameter of movable drive face
boss, and replace it if it exceed service limit.
Service limit: 35.950 mm
Measure the inner diameter of movable drive face,
and replace it if it exceed service limit.
Service limit: 36.055 mm
Reassembly/installation
Install weight rollers.
Caution
The weight roller two end surfaces are not
certainly same. In order to lengthen the roller
life and prevented exceptionally wears the
occurrence, Please end surface of the closure
surface counter clockwise assembles onto
movable drive face.
Install ramp plate.
Movable drive face
Drive face boss
To this chapter contents
To Next Page
Loading...
